Home / Paver Calculator
Landscaping & Construction Calculators

Paver Calculator

Paver Calculator

Enter the patio, walkway or driveway size and the paver size to get how many pavers to buy, plus the gravel base and bedding sand in cubic yards, tons and bags.

Use about 10% extra pavers for straight patterns and about 20% for herringbone or diagonal layouts. Weights use about 105 lb per cu ft for crushed gravel base and 100 lb per cu ft for dry sand; bags are the common 0.5 cu ft (50 lb) size.

Pavers to buy (with extra)
0

Area0
Pavers per sq ft0
Gravel base0
Base bags (0.5 cu ft)0
Bedding sand0
Sand bags (0.5 cu ft)0
Paver cost0

Calculation details

Use this paver calculator to find how many pavers you need for a patio, walkway, fire pit area or driveway, plus how much gravel paver base and bedding sand to order in cubic yards, tons and bags.

Choose a rectangle, circle or total area, pick a paver size or enter your own, and set the extra for cuts and the base and sand depths. The calculator returns the pavers to buy, the pavers per square foot, the gravel base and sand in cubic yards, tons and bags, and the paver cost.

How to Calculate How Many Pavers You Need

Follow these four steps to estimate pavers, base and sand by hand, or let the calculator above do the math for you.


01

Measure the Area in Square Feet

Multiply length × width in feet for a rectangle, or use π × diameter² ÷ 4 for a circle. Split L-shaped or odd patios into rectangles and add the areas together.

02

Find the Area of One Paver

Multiply the paver length × width in inches and divide by 144. A 4 × 8 in paver covers 32 ÷ 144 = 0.222 sq ft, so 4.5 pavers fill one square foot. Add the joint gap to each side if your pavers have no spacer nubs.

03

Divide and Add Extra

Divide the area by the paver area, then add about 10% for cuts and breakage on straight patterns, or about 20% for herringbone and diagonal layouts. A 12 × 12 ft patio takes 144 ÷ 0.222 = 648 pavers, or 713 with 10% extra.

04

Add the Gravel Base & Sand

Multiply the area by the base depth in feet (inches ÷ 12) for the compacted gravel base, adding about 20% because it compacts, and by 1 in ÷ 12 for the bedding sand. Divide cubic feet by 27 for cubic yards.

FORMULA & EXPLANATION

Paver Formulas & Glossary

A paver estimate has two parts: an area calculation that turns square feet into a paver count, and a volume calculation that sizes the gravel base and the sand bed the pavers sit on.

PAVER FORMULA

Area

Area (sq ft) = Length × Width, or π × Diameter² ÷ 4 for a circle

Paver area

Paver Area (sq ft) = (Paver Length + Gap) × (Paver Width + Gap) ÷ 144

Pavers needed

Pavers = Area ÷ Paver Area × (1 + Extra %), rounded up

Base and sand

Base (cu ft) = Area × Base Depth (in) ÷ 12 × 1.2; Sand (cu ft) = Area × Sand Depth (in) ÷ 12; Cubic Yards = cu ft ÷ 27

Tons = cu ft × 105 lb (gravel base) or 100 lb (dry sand) ÷ 2,000. One cubic yard fills 54 bags of 0.5 cu ft.


Base and sand depths follow the Interlocking Concrete Pavement Institute (ICPI) application guide: 4 to 6 in of compacted aggregate base for walks and patios, 6 to 8 in for residential driveways and a 1 to 1-1/2 in sand bed. Weights use about 105 lb per cu ft for crushed gravel and 100 lb per cu ft for dry sand. Soft or wet soil and cold climates may need a thicker base, so check local practice.

A

Area (A)

The surface to pave in square feet: length × width for a rectangle or π × diameter² ÷ 4 for a circle. Add the areas of several sections for irregular shapes.

P

Paver Area (P)

The area one paver covers: (length + gap) × (width + gap) in inches ÷ 144. A 6 × 9 in paver is 0.375 sq ft, a 12 × 12 in paver is 1 sq ft and a 16 × 16 in paver is 1.78 sq ft.

W

Waste Allowance (W)

Extra pavers for edge cuts, breakage and future repairs. Use about 10% for running bond or basket weave, about 20% for herringbone, diagonal and circular patterns.

D

Base & Sand Depth (D)

The compacted thickness of the gravel base and the sand bed. Base volume (cu ft) = A × D ÷ 12 × 1.2 for compaction; sand volume = A × 1 ÷ 12 for a 1 inch bed.

Paver Calculator Examples

These worked examples show how area, paver size and depth turn into pavers, base and sand. Each one matches the calculator output.

12 × 12 ft Patio with 4 × 8 Pavers

A square backyard patio in brick-size holland pavers on a 4 inch base, priced at an example $0.60 per paver.


Given: 12 ft × 12 ft, 4 × 8 in pavers, no joint gap, 10% extra, 4 in base (+20%), 1 in sand, $0.60 per paver

Calculation:
Area = 144 sq ft; paver = 32 ÷ 144 = 0.2222 sq ft; 144 ÷ 0.2222 = 648 × 1.10 = 713 pavers
Base = 144 × 4 ÷ 12 × 1.2 = 57.6 cu ft = 2.13 cu yd = 3.02 tons; sand = 12 cu ft = 0.44 cu yd
713 × $0.60 = $427.80

Answer: 713 pavers, 2.13 cubic yards (3.02 tons) of base and 0.44 cubic yards of sand; pavers about $427.80

Paver Driveway, 12 × 24 ft

A single-car driveway pad in 4 × 8 in pavers on a thicker 6 inch compacted gravel base for vehicle loads.


Given: 12 ft × 24 ft, 4 × 8 in pavers, 10% extra, 6 in base (+20%), 1 in sand

Calculation:
Area = 288 sq ft; 288 ÷ 0.2222 = 1,296 × 1.10 = 1,426 pavers
Base = 288 × 6 ÷ 12 × 1.2 = 172.8 cu ft = 6.4 cu yd = 9.07 tons
Sand = 288 × 1 ÷ 12 = 24 cu ft = 0.89 cu yd = 1.2 tons

Answer: 1,426 pavers, 6.4 cubic yards (9.07 tons) of gravel base and 0.89 cubic yards (1.2 tons) of sand

Round Fire Pit Patio, 12 ft Diameter

A circular patio around a fire pit in 12 × 12 in pavers, with 15% extra for the many curved edge cuts, at an example $3 per paver.


Given: circle 12 ft across, 12 × 12 in pavers, 15% extra, 4 in base (+20%), 1 in sand, $3 per paver

Calculation:
Area = π × 12² ÷ 4 = 113.1 sq ft; 113.1 ÷ 1 = 113.1 × 1.15 = 131 pavers
Base = 113.1 × 4 ÷ 12 × 1.2 = 45.24 cu ft = 1.68 cu yd = 2.38 tons; sand = 9.42 cu ft = 0.35 cu yd
131 × $3 = $393

Answer: 131 pavers, 1.68 cubic yards (2.38 tons) of base and 0.35 cubic yards of sand; pavers about $393

Paver Calculator FAQs

Answers to common questions about how many pavers you need, pavers per square foot, paver base and sand, waste and pavers for patios, fire pits and driveways.

How many pavers do I need?

Divide the area you are paving in square feet by the area of one paver (length × width in inches ÷ 144), then add about 10% for cuts and breakage. A 10 × 10 ft patio is 100 sq ft; with 4 × 8 in pavers (0.222 sq ft each) that is 450 pavers, or 495 with 10% extra.

A 12 × 12 ft patio is 144 sq ft. With 4 × 8 in pavers you need 648, or 713 with 10% extra. With 12 × 12 in pavers you need 144, or 159 with 10% extra, and with 16 × 16 in pavers you need 81, or 90 with 10% extra.

Divide 144 by the paver length × width in inches. That gives 4.5 pavers per sq ft for 4 × 8 in, 4 for 6 × 6 in, 2.67 for 6 × 9 in, 2.25 for 8 × 8 in, 1 for 12 × 12 in, 0.56 for 16 × 16 in and 0.25 for 24 × 24 in pavers. Multiply by 100 for pavers per 100 sq ft, such as 450 for 4 × 8 in.

Multiply the area by the compacted base depth in feet and add about 20% because gravel compacts. A 12 × 12 ft patio with a 4 inch base needs 144 × 4 ÷ 12 = 48 cu ft, or 57.6 cu ft with 20% extra, which is 2.13 cubic yards or about 3.02 tons at 105 lb per cu ft.

Most pavers sit on a 1 inch screeded sand bed, so sand volume is the area ÷ 12 in cubic feet. A 12 × 12 ft patio needs 12 cu ft of sand, or 0.44 cubic yards, about 0.6 tons or 24 bags of 0.5 cu ft. Joint sand swept in after laying is a separate, smaller amount.

The ICPI application guide calls for 4 to 6 inches of compacted aggregate base under walks and patios and 6 to 8 inches under residential driveways, with a 1 to 1-1/2 inch sand bed on top. Use the deeper end on clay, wet or frost-prone soil.

Divide the cubic feet by the bag size and round up. Paver base and sand commonly come in 50 lb bags of 0.5 cu ft, so a 10 × 10 ft patio with a 4 inch base (40 cu ft with 20% extra) takes 80 bags of base and 17 bags of sand for a 1 inch bed. For more than 2 or 3 cubic yards, bulk delivery is usually easier.

Plan on about 10% extra for straight patterns such as running bond and about 20% for herringbone or diagonal layouts, which need more cuts. For 100 sq ft of 4 × 8 in pavers, that is 495 pavers with 10% extra or 540 with 20%. Keep a few spares from the same batch for repairs.

Yes, if your pavers have no built-in spacer nubs. Add the gap to the length and width of each paver. A 4 × 30 ft walkway in 6 × 9 in pavers needs 352 pavers with 10% extra and no gap, but 341 with a 1/8 in joint, because each paver covers a little more area.

Find the circle area with π × diameter² ÷ 4 and divide by the paver area. A 12 ft circle is 113.1 sq ft, so it takes 113.1 12 × 12 in pavers, or 131 with 15% extra for the curved cuts. Count the fire pit wall blocks separately.

Driveways need a thicker base, usually 6 to 8 inches. A 12 × 24 ft driveway with a 6 inch base needs 172.8 cu ft with 20% extra, which is 6.4 cubic yards or about 9.07 tons of gravel, plus 0.89 cubic yards (1.2 tons) of sand for a 1 inch bed. Size any gravel layers with the Gravel Calculator.

With 4 × 8 in pavers, a 10 × 10 ft patio (100 sq ft) needs 450 pavers, or 495 with 10% extra, and a 20 × 20 ft patio (400 sq ft) needs 1,800, or 1,980 with 10% extra. With 12 × 12 in pavers, a 10 × 10 ft patio needs 110 pavers with 10% extra.

Explore More Calculators

Get fast, precise, and beautifully designed solutions for all your personal, financial, and health calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top