Home / Roofing Calculator
Roofing & Construction Calculators

Roofing Calculator

Roofing Calculator

Enter the building size, overhang and roof pitch to get the roof area, roofing squares, shingle bundles and underlayment rolls, with waste and an optional cost estimate.

One roofing square = 100 sq ft of roof surface. The pitch multiplier turns the flat footprint into the real sloped area. Starter strip and hip and ridge cap shingles are ordered separately.

Shingle bundles to order (with waste)
0

Roof area0
Roofing squares0
Squares with waste0
Pitch multiplier0
Underlayment rolls0
Estimated shingle cost0

Calculation details

Use this roofing calculator to find your roof area, roofing squares and how many bundles of shingles to buy. Enter the building size, overhang and roof pitch, add waste for a gable, hip or complex roof, and get the shingles, underlayment rolls and an optional cost.

Measure the house footprint from the ground, add the eave and rake overhang, enter the pitch and pick the roof type. The calculator applies the pitch multiplier and returns the sloped roof area, squares, bundles and underlayment.

How to Calculate Roofing Squares and Shingles

Follow these four steps to estimate a roof by hand, or let the calculator above do the math for you.


01

Measure the Footprint With Overhang

Measure the building length and width from the ground and add the overhang on both sides. A 40 × 30 ft house with 12 in eaves and rakes has a footprint of 42 × 32 = 1,344 sq ft.

02

Apply the Pitch Multiplier

A sloped roof has more surface than its footprint. Multiply by √(1 + (rise ÷ 12)²): a 6/12 pitch gives 1.118, so 1,344 × 1.118 = 1,502.64 sq ft of roof.

03

Convert to Squares and Add Waste

Divide the roof area by 100, because one roofing square covers 100 sq ft: 1,502.64 ÷ 100 = 15.03 squares. Add about 10% waste for a gable roof or 15% for a hip roof: 15.03 × 1.10 = 16.53 squares.

04

Convert to Bundles and Rolls

Most asphalt shingles come 3 bundles per square, so 16.53 × 3 = 49.59, rounded up to 50 bundles. Divide the roof area by the roll coverage for underlayment, such as 1,000 sq ft per synthetic roll.

FORMULA & EXPLANATION

Roofing Formulas & Glossary

A roofing estimate starts with the flat footprint of the house, turns it into the real sloped area with the pitch multiplier, and then converts that area into squares, bundles and rolls with an allowance for cutting waste.

ROOFING FORMULA

Footprint

Footprint (sq ft) = (Length + 2 × Overhang) × (Width + 2 × Overhang)

Roof area

Roof Area = Footprint × √(1 + (Rise ÷ 12)²)

Squares

Squares = Roof Area ÷ 100; Squares to Order = Squares × (1 + Waste %)

Bundles and rolls

Bundles = Squares to Order × Bundles per Square (round up); Rolls = Roof Area ÷ Roll Coverage (round up)

With 3 bundles per square, one bundle covers about 33.3 sq ft. A 10-square synthetic roll covers 1,000 sq ft, #15 felt about 400 sq ft and #30 felt about 200 sq ft.


Common pitch multipliers: 3/12 = 1.031, 4/12 = 1.054, 5/12 = 1.083, 6/12 = 1.118, 8/12 = 1.202, 9/12 = 1.250 and 12/12 = 1.414. The multiplier works for gable, hip and shed roofs as long as every plane has the same pitch; measure planes with different pitches separately and add them.

F

Footprint (F)

The flat plan area of the roof seen from above: (building length + 2 × overhang) × (building width + 2 × overhang), in square feet.

M

Pitch Multiplier (M)

The slope factor √(1 + (rise ÷ 12)²) for a pitch of rise inches per 12 inches of run. It equals 1 ÷ cos(angle) when the pitch is given in degrees.

SQ

Roofing Square (SQ)

The unit roofers use to price and order material: one square is 100 sq ft of roof surface. Roof area ÷ 100 = squares.

W

Waste Factor (W)

Extra shingles for cuts at rakes, hips, valleys and penetrations: about 10% on a simple gable roof, 12 to 15% on a hip roof and 15 to 20% or more on cut-up roofs.

Roofing Calculator Examples

These worked examples show how the footprint and pitch turn into roof area, squares and bundles. Each one matches the calculator output.

Gable Ranch House, 40 × 30 ft

A single-story house with a 6/12 gable roof and 12 inch overhangs, shingles at an example price of $40 per bundle.


Given: 40 ft × 30 ft, 12 in overhang, 6/12 pitch, gable roof (10% waste), 3 bundles per square, synthetic underlayment, $40 per bundle

Calculation:
Footprint = 42 × 32 = 1,344 sq ft; roof area = 1,344 × 1.118 = 1,502.64 sq ft
1,502.64 ÷ 100 = 15.03 squares × 1.10 = 16.53 squares × 3 = 49.59 → 50 bundles
Underlayment 1,502.64 ÷ 1,000 → 2 rolls; cost 50 × $40 = $2,000

Answer: About 15.03 squares of roof: order 50 bundles and 2 synthetic underlayment rolls (about $2,000 in shingles)

Hip Roof, 50 × 28 ft

A larger house with a 5/12 hip roof, 18 inch overhangs and #15 felt underlayment.


Given: 50 ft × 28 ft, 18 in overhang, 5/12 pitch, hip roof (15% waste), 3 bundles per square, #15 felt (400 sq ft per roll)

Calculation:
Footprint = 53 × 31 = 1,643 sq ft; roof area = 1,643 × 1.0833 = 1,779.92 sq ft
1,779.92 ÷ 100 = 17.8 squares × 1.15 = 20.47 squares × 3 = 61.41 → 62 bundles
Felt 1,779.92 ÷ 400 = 4.45 → 5 rolls

Answer: About 17.8 squares of roof: order 62 bundles of shingles and 5 rolls of #15 felt

Shed Roof, 16 × 12 ft

A backyard shed with a low 3/12 single-slope roof and 6 inch overhangs.


Given: 16 ft × 12 ft, 6 in overhang, 3/12 pitch, shed roof (10% waste), 3 bundles per square

Calculation:
Footprint = 17 × 13 = 221 sq ft; roof area = 221 × 1.0308 = 227.8 sq ft
227.8 ÷ 100 = 2.28 squares × 1.10 = 2.51 squares × 3 = 7.52 → 8 bundles
At 3/12 the IRC requires a double layer of underlayment

Answer: About 2.28 squares: order 8 bundles, with double underlayment for the low slope

Roofing Calculator FAQs

Answers to common questions about roofing squares, shingle bundles, pitch multipliers, waste, underlayment and measuring a roof.

How do I calculate roofing squares?

Find the roof surface area in square feet and divide by 100, because one roofing square covers 100 sq ft. Measure the footprint with overhang, multiply by the pitch multiplier and then divide. A 42 × 32 ft footprint at 6/12 is 1,344 × 1.118 = 1,502.64 sq ft, or 15.03 squares.

Multiply the squares (with waste) by the bundles per square, which is 3 for most 3-tab and architectural asphalt shingles, and round up. Each bundle covers about 33.3 sq ft. A roof of 15.03 squares with 10% waste needs 16.53 × 3 = 49.59, so buy 50 bundles. Check the label, as heavier designer shingles can be 4 or 5 bundles per square.

Multiply the flat footprint (including overhangs) by the pitch multiplier √(1 + (rise ÷ 12)²). For a 4/12 roof the multiplier is 1.054, so a 1,500 sq ft footprint has about 1,581 sq ft of roof. If you are not sure of the pitch, find it with the Roof Pitch Calculator.

The multipliers are 1.054 for 4/12, 1.118 for 6/12 and 1.202 for 8/12. Other common values are 3/12 = 1.031, 5/12 = 1.083, 7/12 = 1.158, 9/12 = 1.250, 10/12 = 1.302 and 12/12 = 1.414. They come from the Pythagorean theorem: the rafter is longer than its run by that factor.

Plan on about 10% for a simple gable roof, 12 to 15% for a hip roof and 15 to 20% or more for roofs with many valleys, dormers or skylights. Hips and valleys need more angled cuts, which is why the calculator sets 15% for hip roofs and 20% for complex roofs. Starter strip and ridge cap are separate items.

It depends on the roof footprint and pitch, not the floor area. If the roof footprint including overhangs is 2,000 sq ft at a 6/12 pitch, the roof is 2,000 × 1.118 = 2,236.07 sq ft, or 22.36 squares. With 10% waste that is 24.6 squares, or 74 bundles. A two-story house of 2,000 sq ft has a much smaller roof footprint.

A 10 × 12 ft shed with 6 inch overhangs has a footprint of 11 × 13 = 143 sq ft. At a 4/12 pitch the roof is 143 × 1.0541 = 150.74 sq ft, or 1.51 squares. With 10% waste that is 1.66 squares × 3 = 4.97, so buy 5 bundles.

Divide the roof area by the coverage printed on the roll and round up. Synthetic underlayment often comes in 10-square rolls (1,000 sq ft), #15 felt covers about 400 sq ft and #30 felt about 200 sq ft. A 1,502.64 sq ft roof needs 2 synthetic rolls, 4 rolls of #15 felt or 8 rolls of #30 felt. Laps use part of each roll, so check the net coverage on the label.

Measure the outside walls of the house from the ground, add the overhang on each side (often 12 to 24 inches), and multiply the footprint by the pitch multiplier. You can read the pitch with a level and tape at a gable end or from the attic rafters. For a rafter-by-rafter check, use the Rafter Length Calculator.

Asphalt shingles are allowed only on slopes of 2/12 or steeper under the International Residential Code (R905.2.2). From 2/12 up to under 4/12, the code requires a double layer of underlayment. Below 2/12, use a low-slope system such as modified bitumen, TPO or EPDM instead of shingles.

No. The calculator covers the field shingles and underlayment. Starter strip runs along the eaves and rakes, and hip and ridge cap shingles run along the hips and ridge, so measure those lengths in linear feet and use the coverage per bundle printed by the manufacturer. Drip edge is also sold by the linear foot.

Yes. Choose meters and centimeters and enter the pitch in degrees if you like. A 10 × 8 m house with 30 cm overhangs and a 30° roof has a footprint of 10.6 × 8.6 = 91.16 sq m and a roof area of about 105.26 sq m (1,133.04 sq ft), or 11.33 squares. With 10% waste that is 38 bundles.

Explore More Calculators

Get fast, precise, and beautifully designed solutions for all your personal, financial, and health calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top