Home / Board Foot Calculator
Lumber & Woodworking Calculators

Board Foot Calculator

Board Foot Calculator

Enter the lumber's thickness, width, length and quantity. Add a price per board foot to also see the total cost.

Use the nominal size (for example 2 × 4) for dimensional softwood, or the rough thickness (4/4 is 1 inch) and measured width for hardwood. See the FAQ below for details.

Total board feet
0

Per board0
Thousand board feet (MBF)0
Estimated cost0

Calculation details

Calculate board feet for lumber instantly, enter thickness, width, length and quantity, and add a price per board foot to see the total cost too.

Enter your lumber's thickness, width and length, plus how many boards you have, to get the total board footage, and total cost if you add a price per board foot.

How to Calculate Board Feet

Board footage measures the volume of lumber. Follow these steps to calculate it by hand, or let the calculator above do it instantly.


01

Measure Thickness

Measure the board's thickness in inches. Use the nominal size (the "2" in 2×4) for standard dimensional softwood, or the rough thickness for hardwood, where 4/4 means 1 inch.

02

Measure Width

Measure the board's width in inches across its widest face. Use the nominal width (the "4" in 2×4) for softwood, or the measured width for hardwood.

03

Measure Length

Measure the board's length in feet from end to end, or in inches if that's easier, then switch the length unit in the calculator.

04

Multiply & Divide by 12

Multiply thickness × width × length (in feet), then divide by 12. That gives board feet for one piece, multiply by quantity for a full order, and add a price to get the total cost.

FORMULA & EXPLANATION

Board Foot Formulas & Glossary

A board foot measures lumber volume, not just length. One board foot equals 144 cubic inches, a board 12 inches long, 12 inches wide and 1 inch thick.

BOARD FOOT FORMULA

Standard formula (feet & inches)

Board Feet = (Thickness in. × Width in. × Length ft) ÷ 12

All measurements in inches

Board Feet = (Thickness in. × Width in. × Length in.) ÷ 144

Multiple boards

Total Board Feet = Board Feet per board × Quantity

Cost

Total Cost = Total Board Feet × Price per Board Foot

1 board foot = 144 cubic inches = a board 12 in × 12 in × 1 in. For wholesale lumber pricing, 1 MBF = 1,000 board feet.


These formulas use nominal lumber sizes, the convention most lumberyards use for pricing dimensional softwood. Hardwood is usually priced by its rough thickness in quarters and its measured width, see the FAQ below.

T

Thickness (T)

The board's thickness in inches, nominal for dimensional softwood (2×4, 2×6 and so on), or rough thickness for hardwood (4/4 is 1 inch).

W

Width (W)

The board's width in inches, nominal for softwood and measured for hardwood.

L

Length (L)

The board's length, usually in feet for dimensional lumber, though the calculator above also accepts inches.

BF

Board Feet (BF)

The unit of lumber volume: one board foot is a piece 1 ft × 1 ft × 1 in, or 144 cubic inches.

Board Foot Examples

These worked examples show how common lumber dimensions convert into board feet.

Single 2×4×8 Board

A standard nominal 2×4 stud, 8 feet long, the most common framing lumber size.


Given: Thickness 2 in, width 4 in, length 8 ft (nominal size)

Calculation:
(2 × 4 × 8) ÷ 12 = 5.33 board feet

Answer: 5.33 board feet per stud

Bundle of Ten 2×6×10 Boards

Ten nominal 2×6 boards, each 10 feet long, a typical small deck framing order.


Given: Thickness 2 in, width 6 in, length 10 ft, quantity 10

Calculation:
(2 × 6 × 10) ÷ 12 = 10 board feet per board
10 × 10 boards = 100 board feet

Answer: 100 board feet total

Hardwood Board With Cost

A 4/4 hardwood board (1 inch thick), 7 inches wide and 6 feet long, priced at $6.50 per board foot.


Given: Thickness 1 in, width 7 in, length 6 ft, price $6.50/bd ft

Calculation:
(1 × 7 × 6) ÷ 12 = 3.5 board feet
3.5 × $6.50 = $22.75

Answer: 3.5 board feet, costing about $22.75

Board Foot Calculator FAQs

Answers to common questions about board foot formulas, nominal vs. actual lumber sizes, and how lumberyards price by the board foot.

What is a board foot?

A board foot is a unit of lumber volume equal to 144 cubic inches, the volume of a board 12 inches long, 12 inches wide and 1 inch thick. Because it measures volume rather than length, a thicker or wider board holds more board feet than a thinner one of the same length.

One board foot is 144 cubic inches of wood, the same as a board 1 inch thick, 12 inches wide and 12 inches long. A nominal 2×6 that is 12 inches long is also 1 board foot (2 × 6 × 12 ÷ 144 = 1), and so is a 1-inch-thick board 6 inches wide and 24 inches long. Its price is the supplier's price per board foot, so at $5.25 per board foot, one board foot costs $5.25.

Multiply thickness (in) × width (in) × length (ft), then divide by 12. For boards measured entirely in inches, divide by 144 instead. Dimensional softwood lumber is almost always calculated using its nominal size (the "2×4" on the label), not its smaller actual size.

Using the nominal 2×4 size that lumberyards price by: (2 × 4 × 8) ÷ 12 = 5.33 board feet. If you used the board's actual size instead (about 1.5 in × 3.5 in), you would get only 3.5 board feet, which is why dimensional lumber is priced by its nominal size.

Using the nominal size, (1 × 6 × 8) ÷ 12 = 4 board feet. A bundle of ten 1×6×8 boards contains 40 board feet.

Nominal size is the name lumber is sold under, such as 2×4. The actual size is smaller once the board is dried and planed, so a 2×4 measures about 1.5 × 3.5 inches. Softwood is priced by nominal size, so enter 2 and 4 in the calculator. Hardwood is priced by its rough thickness in quarters and its measured width, so enter the thickness and width your seller quotes.

Hardwood thickness is sold in quarters of an inch. 4/4 means 1 inch thick, 5/4 means 1.25 inches, 6/4 means 1.5 inches and 8/4 means 2 inches. Enter that thickness in inches in the calculator. The finished board is slightly thinner after planing, but board feet are normally counted on the rough thickness.

Multiply the total board feet by the price per board foot. For example, 20 board feet at $5.25 per board foot costs 20 × $5.25 = $105.00. If a supplier quotes the price per MBF, divide it by 1,000 first to get the price per board foot.

MBF stands for "thousand board feet" (M is the Roman numeral for 1,000). Sawmills and wholesale lumber suppliers often quote prices per MBF rather than per single board foot, since large orders are easier to price in thousands, so $500/MBF is the same price as $0.50 per board foot.

Explore More Calculators

Explore more CalcNova tools for quick, practical calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top