Home / Tile Calculator
Flooring & Tile Calculators

Tile Calculator

Tile Calculator

Enter the floor or wall size and your tile size to get the number of tiles, boxes and the estimated cost, with grout joints and waste included.

The tile count uses the tile size plus one grout joint, the same way tiles sit on the floor. Box counts use tiles per box when you enter it, otherwise the box coverage.

Tiles to buy (with waste)
0

Area to tile0
Tiles before waste0
Coverage per tile0
Area to buy (with waste)0
Boxes0
Estimated cost0

Calculation details

Use this tile calculator to find how many tiles and boxes you need for a floor, shower, wall or backsplash. It counts the grout joints, adds waste for your layout pattern and estimates the cost per square foot or per box.

Enter the area length and width (or the total square footage), the tile size and the grout joint, then pick a layout pattern. The calculator returns the tiles to buy, boxes and the estimated cost.

How to Calculate How Many Tiles You Need

Follow these four steps to estimate tile by hand, or let the calculator above do the math for you.


01

Measure the Area in Square Feet

Multiply length × width in feet. Split L-shaped rooms into rectangles and add them, and subtract areas you will not tile, such as a tub or cabinet base.

02

Find the Coverage of One Tile

Add one grout joint to the tile length and width in inches, multiply them and divide by 144. A 12 × 12 in tile with a 1/8 in joint covers 12.125 × 12.125 ÷ 144 = 1.0209 sq ft.

03

Divide Area by Tile Coverage

Divide the area by the coverage of one tile. An 80 sq ft floor with 12 × 12 tiles and 1/8 in joints needs 80 ÷ 1.0209 = 78.4 tiles before waste.

04

Add Waste & Round Up to Boxes

Add about 10% for a straight or brick layout and 15% for diagonal or herringbone, round up to whole tiles, then divide by the tiles or square feet per box and round up again.

FORMULA & EXPLANATION

Tile Formulas & Glossary

A tile estimate is an area calculation: the surface area divided by the area one tile covers, including its share of the grout joint, plus an allowance for cuts and breakage.

TILE FORMULA

Area to tile

Area (sq ft) = Length (ft) × Width (ft) − Areas Not Tiled

Coverage of one tile

Coverage (sq ft) = (Tile Length + Joint) × (Tile Width + Joint) ÷ 144

Tiles to buy

Tiles = Area ÷ Coverage × (1 + Waste %) (round up)

Boxes and cost

Boxes = Tiles ÷ Tiles per Box, or Area × (1 + Waste %) ÷ Sq Ft per Box (round up)

Cost = Area × (1 + Waste %) × Price per Sq Ft, or Boxes × Price per Box. Tiles per sq ft without grout = 144 ÷ (length × width in inches): 1 for 12 × 12 in, 0.5 for 12 × 24 in, 8 for 3 × 6 in.


Waste guidance follows common tile industry advice (about 10% for standard layouts, 15% or more for diagonal and herringbone patterns). Box coverage differs by product, so always check the label on the box.

A

Tiled Area (A)

Length × width in square feet, minus any areas you will not tile. For walls, use width × height of each wall and add them together.

C

Tile Coverage (C)

The area one tile covers including one grout joint: (tile length + joint) × (tile width + joint) ÷ 144, in square feet.

G

Grout Joint (G)

The gap between tiles, usually 1/16 to 1/4 inch. Wider joints mean slightly fewer tiles; the effect is largest with small tiles such as mosaics and subway tile.

W

Waste Allowance (W)

Extra tile for cuts, breakage and future repairs: about 10% for straight or brick layouts and 15% for diagonal or herringbone. Irregular rooms may need 15 to 20%.

Tile Calculator Examples

These worked examples show how room sizes and tile sizes turn into tile and box counts. Each one matches the calculator output.

Bathroom Floor, 10 × 8 ft

12 × 12 in porcelain tile in a straight grid, sold in boxes that cover 15 sq ft at an example price of $30 per box.


Given: 10 ft × 8 ft, 12 × 12 in tile, 1/8 in grout joint, 10% waste, 15 sq ft per box, $30 per box

Calculation:
Area = 10 × 8 = 80 sq ft; tile coverage = 12.125 × 12.125 ÷ 144 = 1.0209 sq ft
80 ÷ 1.0209 = 78.36 tiles × 1.10 = 86.19, round up to 87 tiles
80 × 1.10 = 88 sq ft ÷ 15 = 5.87, round up to 6 boxes × $30 = $180

Answer: 87 tiles, or 6 boxes for about $180

Kitchen Floor in Herringbone, 12 × 14 ft

12 × 24 in plank tile laid in a herringbone pattern at an example price of $3.50 per square foot.


Given: 12 ft × 14 ft, 12 × 24 in tile, 1/8 in grout joint, 15% waste, 16 sq ft per box, $3.50 per sq ft

Calculation:
Area = 12 × 14 = 168 sq ft; tile coverage = 24.125 × 12.125 ÷ 144 = 2.0314 sq ft
168 ÷ 2.0314 = 82.70 tiles × 1.15 = 95.11, round up to 96 tiles
168 × 1.15 = 193.2 sq ft ÷ 16 = 12.08, round up to 13 boxes; 193.2 × $3.50 = $676.20

Answer: 96 tiles in 13 boxes, about $676.20 for the tile

Subway Tile Backsplash, 30 sq ft

3 × 6 in subway tile in a brick (offset) layout, sold 80 tiles to a box.


Given: 30 sq ft, 3 × 6 in tile, 1/16 in grout joint, 10% waste, 80 tiles per box

Calculation:
Tile coverage = 6.0625 × 3.0625 ÷ 144 = 0.1289 sq ft
30 ÷ 0.1289 = 232.68 tiles × 1.10 = 255.95, round up to 256 tiles
256 ÷ 80 = 3.2, round up to 4 boxes

Answer: 256 subway tiles, or 4 boxes of 80

Tile Calculator FAQs

Answers to common questions about tile counts, tiles per square foot, waste, grout joints, boxes, showers, backsplashes and the cost of tiling.

How do I calculate how many tiles I need?

Measure the area in square feet (length × width). Find the area of one tile by multiplying its length and width in inches and dividing by 144. Divide the room area by the tile area, add about 10% for waste and round up to a whole tile.

A 12 × 12 in tile covers exactly 1 sq ft, so 100 sq ft takes 100 tiles before waste and 110 tiles with 10% extra. If you count 1/8 in grout joints, each tile covers 1.0209 sq ft and 108 tiles are enough with the same 10% allowance.

Each 12 × 24 in tile covers 2 sq ft, so divide the area by 2. A 100 sq ft floor needs 50 tiles, or 55 with 10% waste. Plank tiles in a herringbone pattern need about 15% extra.

Most tile suppliers suggest about 10% extra for a straight grid or brick layout and about 15% for diagonal or herringbone layouts. Rooms with many corners, angles or curved walls can need 15 to 20%. Keep a few spare tiles from the same lot for future repairs.

Yes, slightly. Each tile plus its joint covers a little more area, so you need fewer tiles. With 12 × 12 tile and 1/8 in joints, 100 sq ft needs 97.9 tiles instead of 100 (about 2% fewer). The effect grows with small tiles: 3 × 6 subway tile with 1/16 in joints needs about 3% fewer tiles.

Divide the number of tiles (with waste) by the tiles per box, or divide the square footage to buy by the coverage per box, then round up. Box coverage varies by product, so read it from the box label. Enter either value in the calculator to get the box count.

Split the room into rectangles, measure each one and add the areas. Then subtract spaces you will not tile, such as a cabinet base or tub. A 10 × 8 ft room with 15 sq ft of cabinets leaves 65 sq ft, which takes 72 tiles of 12 × 12 in with 10% waste.

Measure each wall as width × height and add them. A shower with a 5 ft back wall and two 3 ft side walls, tiled 8 ft high, has (5 + 3 + 3) × 8 = 88 sq ft. With 12 × 24 in tile, 1/8 in joints and 10% waste that is 48 tiles. Measure the shower floor separately if it uses a different tile.

Divide 144 by the tile length × width in inches. That gives 9 tiles per sq ft for 4 × 4 in, 4 for 6 × 6 in, 8 for 3 × 6 in subway tile, 1 for 12 × 12 in, 0.5 for 12 × 24 in, 0.44 for 18 × 18 in and 0.25 for 24 × 24 in tile.

Measure the height from the countertop to the bottom of the upper cabinets and multiply by the length of each wall section, then subtract windows. A 30 sq ft backsplash in 3 × 6 in subway tile with 1/16 in joints and 10% waste takes 256 tiles, or 4 boxes of 80.

Your total is the tile itself plus setting materials and labor. Professional installation labor typically runs about $3 to $15 per sq ft, and removing old tile can add roughly $2 to $7 per sq ft. Enter your tile price per square foot or per box in the calculator for the material cost.

Yes. Choose meters and centimeters, and enter the tile size in cm. A 4 × 3 m room (12 sq m) with 60 × 60 cm tiles and 1/8 in (3.2 mm) joints needs 33 tiles before waste and 37 with 10% extra. With boxes of 1.44 sq m, that is 10 boxes.

Explore More Calculators

Get fast, precise, and beautifully designed solutions for all your personal, financial, and health calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top