Home / Drywall Calculator
Construction & Interior Calculators

Drywall Calculator

Drywall Calculator

Enter the room size and wall height to get the number of drywall sheets, plus screws, joint tape and joint compound for walls and ceiling.

A standard 3 × 7 ft door is 21 ft² and a 3 × 5 ft window is 15 ft². Use the extra area box for closets, a stair wall or more rooms. Leave the price empty if you only need quantities.

Drywall sheets to buy
0

Area to cover0
Sheets incl. waste0
Drywall screws0
Joint tape0
All-purpose joint compound0
Sheet cost0

Calculation details

Use this free drywall calculator to find how many sheets of drywall you need for the walls and ceiling of a room, plus the screws, joint tape and joint compound (mud) to hang and finish them.

Enter the room length, width and wall height, choose the sheet size and stud spacing, then subtract doors and windows to get a full drywall material list.

How to Calculate Drywall

Follow these four steps to turn a room into a drywall shopping list, or let the calculator above do the math for you.


01

Measure the Walls and Ceiling

Add the wall lengths to get the perimeter and multiply by the wall height. Add the ceiling (length × width) if you are covering it. A 12 × 12 ft room with 8 ft walls has 48 × 8 = 384 ft² of wall plus a 144 ft² ceiling, 528 ft² in total.

02

Subtract Doors and Windows

Take out large openings: a standard 3 × 7 ft door is 21 ft² and a 3 × 5 ft window is 15 ft². With one door and one window the 12 × 12 room drops to 528 − 36 = 492 ft². Many pros skip this for small openings and count it as waste.

03

Divide by the Sheet Size

Add about 10% for cuts and waste, then divide by the area of one sheet and round up. 492 ft² × 1.10 = 541.2 ft², and 541.2 ÷ 32 = 16.91, so you buy 17 sheets of 4 × 8 ft drywall.

04

Add Screws, Tape and Mud

USG estimates about 1,000 screws, 370 ft of joint tape and 138 lb of ready-mixed all-purpose compound per 1,000 ft² of board. For 492 ft² that is about 492 screws, 182 ft of tape (one 250 ft roll) and 67.9 lb of mud, or two 4.5 gal pails.

FORMULA & EXPLANATION

Drywall Formulas & Glossary

Drywall estimating is area math: find the square footage to cover, add waste and divide by the sheet size. Screws, tape and joint compound then scale with the same area.

DRYWALL FORMULA

Area to cover

A = 2 × (Length + Width) × Height + Ceiling (Length × Width) + Extra − Openings

Sheets

Sheets = ceil(A × (1 + W) ÷ S)  |  S = 32 ft² (4×8), 36 (4×9), 40 (4×10), 48 (4×12)

Screws

Screws ≈ A × 1 per ft² (16 in o.c.)  |  A × 0.85 per ft² (24 in o.c.)

Tape and joint compound

Tape = A × 0.37 ft  |  Compound = A × 0.138 lb  |  4.5 gal pails = ceil(A ÷ 450 ft²)

USG Gypsum Construction Handbook, per 1,000 ft² of single-layer board: about 1,000 screws (16 in framing) or 850 (24 in), 370 ft of tape, 138 lb of all-purpose ready-mixed compound. Metric: 10.76 screws, 1.214 m of tape and 0.674 kg of compound per m²; 1 ft² = 0.09290304 m².


Screw, tape and compound rates are the USG Gypsum Construction Handbook estimates per 1,000 ft² of single-layer board; the pail coverage (about 450 ft² per 4.5 gal) is the Sheetrock All Purpose label value. Real use depends on the finish level, joint layout and texture, so treat them as a starting point.

A

Area (A)

The surface you will cover: wall perimeter × wall height, plus the ceiling, minus doors and windows. All other quantities are based on this number.

S

Sheet Area (S)

The area of one drywall sheet. Sheets are 4 ft wide: 4 × 8 ft = 32 ft², 4 × 9 = 36, 4 × 10 = 40 and 4 × 12 = 48 ft². Longer sheets mean fewer joints to tape.

W

Waste Factor (W)

Extra sheets for cuts around openings, odd wall lengths and damaged pieces. About 10% is common for simple rooms; use 12–15% for many corners, angled walls or vaulted ceilings.

O

On Center (O.C.)

The distance from the center of one stud or joist to the next, usually 16 in or 24 in. Wider spacing needs fewer screws per sheet but stiffer board on ceilings.

Drywall Calculator Examples

These worked examples come straight from the calculator above, with 10% waste unless noted.

12 × 12 ft Bedroom

A 12 × 12 ft bedroom with 8 ft walls, walls and ceiling covered with 4 × 8 ft sheets, one door (21 ft²) and one window (15 ft²), studs 16 in on center.


Given: 12 × 12 ft, height 8 ft, ceiling yes, openings 36 ft², 4 × 8 ft sheets, 16 in o.c., waste 10%

Calculation:
Area = 48 × 8 + 144 − 36 = 492 ft²
Sheets = ceil(492 × 1.10 ÷ 32) = ceil(16.91) = 17
Screws ≈ 492; tape = 492 × 0.37 = 182 ft; mud = 492 × 0.138 = 67.9 lb

Answer: 17 sheets of 4 × 8 ft, about 492 screws, 182 ft of tape (1 roll of 250 ft) and 67.9 lb of compound (2 pails of 4.5 gal)

10 × 10 ft Room, 9 ft Walls

A 10 × 10 ft room with 9 ft walls, walls and ceiling, no openings subtracted, 4 × 8 ft sheets.


Given: 10 × 10 ft, height 9 ft, ceiling yes, openings 0, 4 × 8 ft sheets, 16 in o.c., waste 10%

Calculation:
Area = 40 × 9 + 100 = 460 ft²
Without waste: ceil(460 ÷ 32) = ceil(14.38) = 15 sheets
With 10%: ceil(506 ÷ 32) = ceil(15.81) = 16 sheets

Answer: 16 sheets of 4 × 8 ft (15 with no waste), about 460 screws, 170 ft of tape and 63.5 lb of compound

Two-Car Garage with 4 × 12 Sheets

A 22 × 20 ft garage with 10 ft walls and the ceiling, a 16 × 7 ft garage door (112 ft²) and a 3 × 7 ft door (21 ft²), 4 × 12 ft sheets, framing 24 in on center, example price $20 per sheet.


Given: 22 × 20 ft, height 10 ft, ceiling yes, openings 133 ft², 4 × 12 ft sheets, 24 in o.c., waste 10%, $20 per sheet

Calculation:
Area = 84 × 10 + 440 − 133 = 1,147 ft²
Sheets = ceil(1,147 × 1.10 ÷ 48) = ceil(26.29) = 27
Screws = 1,147 × 0.85 = 975; cost = 27 × $20 = $540.00

Answer: 27 sheets of 4 × 12 ft ($540.00 at the example price), about 975 screws, 424 ft of tape (2 rolls) and 158.3 lb of compound (3 pails)

Drywall Calculator FAQs

Answers to common questions about drywall sheets, square footage, screws, joint tape, joint compound and waste.

How do you calculate how much drywall you need?

Multiply the wall perimeter by the wall height, add the ceiling area and subtract large doors and windows. Add about 10% for waste, divide by the area of one sheet (32 ft² for 4 × 8) and round up. A 12 × 12 ft room with 8 ft walls, ceiling, one door and one window is 492 ft², so 492 × 1.10 ÷ 32 = 16.91, or 17 sheets.

With 8 ft walls, the walls are 48 × 8 = 384 ft², which is 12 sheets of 4 × 8 ft, or 14 with 10% waste. Walls and ceiling are 528 ft²: 17 sheets without waste and 19 with 10%. With 4 × 12 ft sheets the walls and ceiling take 13 sheets including waste.

A 10 × 10 ft room with 9 ft walls has 360 ft² of wall and a 100 ft² ceiling, 460 ft² in total. That is 460 ÷ 32 = 14.38, so 15 sheets of 4 × 8 ft without waste, or 16 sheets with 10% extra. Subtract the doors and windows if they are large.

Divide by the sheet area: 1,000 ÷ 32 = 31.25, so 32 sheets of 4 × 8 ft, or 35 with 10% waste. With 4 × 10 ft sheets you need 25 (28 with waste), and with 4 × 12 ft sheets 21 (23 with waste). Remember that 1,000 ft² of floor is not 1,000 ft² of wall: measure the walls and ceilings.

Standard sheets are 4 ft wide, so a 4 × 8 ft sheet covers 32 ft², 4 × 9 ft covers 36 ft², 4 × 10 ft covers 40 ft² and 4 × 12 ft covers 48 ft². In metric, a 4 × 8 ft sheet is about 2.97 m², and common metric boards are 1.2 × 2.4 m (2.88 m²) or 1.25 × 2.5 m (3.125 m²).

USG estimates about 1,000 screws per 1,000 ft² of board on framing 16 in on center, which is about 1 screw per ft² or 32 screws per 4 × 8 sheet. At 24 in on center it is about 850 per 1,000 ft², or 27 per 4 × 8 sheet. Ceilings need screws every 12 in, so plan a few more there.

USG estimates 138 lb of ready-mixed all-purpose compound per 1,000 ft² of drywall, about 0.138 lb per ft² or 4.4 lb per 4 × 8 sheet. A 4.5 gal pail covers about 450 ft², so a 492 ft² room needs 67.9 lb, or 2 pails. Lightweight and setting-type compounds use different amounts, so check the bag or pail.

USG estimates about 370 ft of joint tape per 1,000 ft² of board, roughly 0.37 ft per ft² or 11.8 ft per 4 × 8 sheet. A 492 ft² room needs about 182 ft, so one 250 ft roll; a 1,147 ft² garage needs about 424 ft, or two rolls. Add corner bead for outside corners separately.

Add about 10% for a simple room with few openings. Use 12–15% for many corners, angled or vaulted ceilings, stairs or lots of small cut pieces. In a 12 × 12 bedroom, 10% turns 16 sheets into 17. Extra sheets are also handy for repairs later.

Multiply the room length by the width and divide by the sheet area. A 12 × 12 ft ceiling is 144 ft²: 144 ÷ 32 = 4.5, so 5 sheets of 4 × 8 ft, or 3 sheets of 4 × 12 ft with no waste (4 with 10%). For ceiling joists 24 in apart, use 5/8 in or sag-resistant ceiling board.

Longer sheets cover more area per sheet, so you buy fewer and have fewer joints to tape. A 12 × 12 room (walls and ceiling) needs 19 sheets of 4 × 8 ft but only 13 sheets of 4 × 12 ft, both with 10% waste. 4 × 8 sheets are lighter and easier to carry and hang alone.

Multiply the number of sheets by the price per sheet, then add screws, tape, compound and corner bead. In the garage example, 27 sheets at an example price of $20 each cost $540.00 for the board alone. Prices vary by region, thickness and type, so enter your local price in the calculator.

Explore More Calculators

Get fast, precise, and beautifully designed solutions for all your personal, financial, and health calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top