Home / Concrete Block Calculator
Masonry & Concrete Calculators

Concrete Block Calculator

Concrete Block Calculator

Enter the wall size and choose a block. Add openings, waste and a price per block for a full material list.

Use nominal block sizes: they already include the 3/8-inch mortar joint. Grout and mortar figures are estimates based on common rules of thumb.

Blocks to buy (with waste)
0

Net wall area0
Courses × blocks per course0
80-lb mortar mix bags0
Masonry cement + sand0
Grout for cores0
Estimated block cost0

Calculation details

Estimate how many concrete blocks (CMU) you need for a wall, plus mortar, core-fill grout and total cost. Enter the wall size, choose a block size and get an instant material list.

Enter your wall's length and height, subtract any doors or windows, and pick a block size. The calculator returns total blocks, courses, mortar bags, grout for filled cores and the estimated cost.

How to Calculate Concrete Blocks for a Wall

Follow these four steps to estimate blocks by hand, or let the calculator above do the math for you.


01

Measure the Wall

Measure the wall's length and height in feet and multiply them to get the wall area. Subtract the area of any doors, windows or other openings to get the net area.

02

Find the Block Face Area

Multiply the block's nominal height by its length in inches and divide by 144. A standard 8 × 16 inch block face covers 128 ÷ 144 = 0.889 sq ft, including the 3/8-inch mortar joint.

03

Divide Wall Area by Block Area

Divide the net wall area by the block face area. For standard 8 × 16 blocks this works out to about 1.125 blocks per square foot of wall.

04

Add Waste, Mortar & Fill

Add 5–10% for cuts and breakage, then estimate mortar (about 8 bags of 80-lb mortar mix per 100 blocks) and grout if the block cores will be filled.

FORMULA & EXPLANATION

Concrete Block Formulas & Glossary

A block estimate is an area calculation: how many block faces fit into the wall surface. Nominal block sizes already include the 3/8-inch mortar joint, so you don't need to add joints separately.

CONCRETE BLOCK FORMULA

Blocks needed

Blocks = (Wall Length × Wall Height − Openings) ÷ Block Face Area × (1 + Waste %)

Block face area

Face Area (sq ft) = Nominal Height in. × Nominal Length in. ÷ 144 (8 × 16 = 0.889 sq ft)

Mortar

80-lb Mortar Mix Bags = Blocks ÷ 13 (about 8 bags per 100 blocks)

Grout for filled cores

Grout (cu yd) = Blocks × Core Volume per Block ÷ 27

Approximate core volume per fully grouted block: 6 in. 0.17 cu ft, 8 in. 0.28 cu ft, 10 in. 0.39 cu ft, 12 in. 0.50 cu ft. Courses = wall height ÷ 8 in. for standard blocks.


These rules of thumb are for standard hollow concrete blocks laid with 3/8-inch joints. Mortar yield and core volume vary by product and by mason, so check the bag label and order a little extra.

A

Net Wall Area (A)

Wall length × wall height in square feet, minus the area of doors, windows and other openings.

F

Block Face Area (F)

Nominal block height × length ÷ 144. A standard 8 × 16 inch face is 0.889 sq ft, and a half-length 8 × 8 face is 0.444 sq ft.

W

Waste Factor (W)

Extra blocks for cuts, breakage and corners, usually 5% for simple walls and up to 10% for walls with many openings.

CMU

Concrete Masonry Unit (CMU)

The industry name for a concrete block. A standard CMU is 8 × 8 × 16 inches nominal and 7 5/8 × 7 5/8 × 15 5/8 inches actual.

Concrete Block Examples

These worked examples show how wall dimensions convert into blocks, mortar and grout.

Garden Wall, 20 ft × 4 ft

A simple 4-foot-high garden wall built with standard 8 × 8 × 16 blocks.


Given: Length 20 ft, height 4 ft, 8 × 16 in block face, 5% waste

Calculation:
20 × 4 = 80 sq ft
80 ÷ 0.889 = 90 blocks (6 courses of 15)
90 × 1.05 = 94.5, round up to 95

Answer: 95 blocks and about 8 bags of 80-lb mortar mix

Garage Wall With a Door

A 30 ft long, 8 ft high block wall with a 9 ft × 7 ft garage door opening.


Given: Length 30 ft, height 8 ft, opening 9 × 7 ft, 8 × 16 in blocks, 10% waste

Calculation:
30 × 8 = 240 sq ft − 63 sq ft = 177 sq ft
177 ÷ 0.889 = 199.1 blocks
199.1 × 1.10 = 219.0, round up to 220

Answer: 220 blocks and about 17 bags of 80-lb mortar mix

Fully Grouted Foundation Wall

A 40 ft × 4 ft foundation wall of 8-inch blocks with every core filled with grout.


Given: Length 40 ft, height 4 ft, 8 × 8 × 16 in blocks, 5% waste, all cores grouted

Calculation:
40 × 4 = 160 sq ft ÷ 0.889 = 180 blocks
180 × 1.05 = 189 blocks
189 × 0.28 cu ft = 52.9 cu ft ÷ 27 = 1.96 cu yd

Answer: 189 blocks, about 2 cubic yards of grout and 15 bags of mortar mix

Concrete Block Calculator FAQs

Answers to common questions about block counts, mortar, core fill, block sizes and the cost of a block wall.

How many concrete blocks do I need per square foot?

A standard 8 × 16 inch block (nominal size) covers 0.889 sq ft of wall, so you need about 1.125 blocks per square foot, or roughly 113 blocks per 100 sq ft. Half-length 8 × 8 inch blocks cover 0.444 sq ft each, so you need 2.25 per square foot.

A wall 12 ft long and 8 ft high has an area of 96 sq ft. 96 ÷ 0.889 = 108 standard 8 × 16 blocks, which is 12 courses of 9 blocks. Adding 5% for waste gives about 114 blocks.

Plan on about 8 bags of 80-lb premixed mortar per 100 standard blocks, because one 80-lb bag lays up to about 13 blocks. If you mix your own, use about 3 bags of masonry cement and roughly 1,000 lb of sand per 100 blocks. Joint width and waste change the amount, so buy a bag or two extra.

A fully grouted 8-inch block takes about 0.28 cubic feet of grout, so 100 blocks need about 28 cubic feet, or just over 1 cubic yard. 6-inch blocks hold about 0.17 cu ft and 12-inch blocks about 0.50 cu ft. Many walls are grouted only at reinforced cores, so check your plans.

The standard concrete block (CMU) is 8 × 8 × 16 inches nominal. Its actual size is 7 5/8 × 7 5/8 × 15 5/8 inches, and the missing 3/8 inch is the mortar joint. Blocks also come 4, 6, 10 and 12 inches thick, and as half-length 8 × 8 × 8 units. Always estimate with the nominal size.

Concrete blocks are made from cement, sand and gravel, which makes them strong and heavy, about 35 to 40 lb for a standard 8 × 8 × 16 block. Older cinder blocks used coal cinders as the aggregate, so they were lighter but weaker. Most blocks sold today are concrete blocks, even when people call them cinder blocks.

Add about 5% for straight, simple walls and up to 10% for walls with many corners, openings or cut blocks. The extra covers broken blocks and the partial pieces needed at ends, corners and openings.

Standard 8 × 8 × 16 blocks often cost about $1.50 to $3 each, before mortar, grout, rebar and labor. A block wall built by a mason commonly runs about $10 to $20 per square foot, depending on height, reinforcement and local labor rates. Enter your local block price in the calculator to estimate material cost.

Standard blocks are 8 inches tall nominal, so divide the wall height in inches by 8. An 8-foot wall is 96 inches high, and 96 ÷ 8 = 12 courses. A 4-foot wall needs 6 courses.

Divide the wall length in inches by the nominal block length. With standard 16-inch blocks, a 20-foot wall (240 inches) takes 240 ÷ 16 = 15 blocks per course. Multiply by the number of courses to check the total.

Work out the full wall area, then subtract the area of each opening. A 9 × 7 ft garage door removes 63 sq ft. Enter the total openings area in the calculator and it divides only the remaining net area by the block face size.

An 80-lb bag of concrete mix yields about 0.6 cubic feet, and a fully filled 8-inch block holds about 0.28 cubic feet, so each block takes roughly half a bag, or about 47 bags per 100 blocks. For reinforced, structural walls use the masonry grout your plans specify.

Explore More Calculators

Explore more CalcNova tools for quick, practical calculations.

About the authors

CalcNova Editorial Team

CalcNova was created and is maintained collaboratively by two friends who want to make everyday calculations simpler and more accessible. We build practical online calculators and clear explanations to help people understand results and the methods behind them.

Our focus is on clear formulas, useful examples, and regularly maintaining our tools. Calculator results are intended for guidance; for important financial decisions, confirm figures with the relevant provider or a qualified professional.

Scroll to Top